Hot Oil · Nasos ulgamlary
Gyzgyn ýag nasoslary
Horizontal gyzgyn ýag / heat-transfer merkezden gaçyryjy nasoslar üçin thermal oil circuits without abrasive particles — air-cooled path to bearings, up to +350 °C.
Paýlaş
Desan Engineering gyzgyn ýag / heat-transfer nasoslar are suitable üçin heat transfer oils we low-viscosity industrial oils that do not contain abrasive particles.
Horizontal shaft, single-stage volute, end-suction closed impeller merkezden gaçyryjy nasoslar with back pull-out design: bearing group, seal box, shaft we impeller can be removed without separating the volute from the pipeline.
Esasy aýratynlyklar
- Natural air circulation provides temperature drop from casing toward bearings
- Radially closed impellers bilen radial vanes to balance axial force we reduce seal pressure
- High-temperature single mechanical seal
- Grease-lubricated bearings as standard
- Typical use above 100 °C in chemical, petrochemical we food processing heat-transfer circuits
| Görkeziji | Bahasy |
|---|---|
| Discharge flange | DN 32 – DN 150 |
| Flow rate (Q) | Up to 550 m³/h |
| Head (H) | Up to 105 m |
| Cooling | Air-cooled (casing → bearings) |
| Iş temperaturasy | Up to +350 °C |
| Korpus basyşy (Pmax) | 10 – 16 bar |
| Seal | High-temperature mechanical seal |
| Bearings | Grease-lubricated (standard) |
| Dizaýn | Back pull-out, end-suction |
| Ulanyş | Heat transfer / gyzgyn ýag |
Doly egriler, BOM sanawlary we ölçeg tablisalary şu ýerde: technical catalog (PDF).
Ölçeg çyzgysy — gyzgyn ýag nasosynyň silueti we flanesleri.
Kesim çyzgysy — gyzgyn ýag nasos construction.
Operating ranges
Curves üçin approx. 1,450 rpm and 2,900 rpm. Çäk: sarp 550 m³/h, basyş belentligi 105 m, fluid temperature up to +350 °C.
Paýlaş oil type, temperature, viscosity, flow we head üçin correct seal we material selection.
Taslama talaplaryňyzy iberiň. Toparymyz laýyk nasos saýlawy bilen jogap berer.
