Centrifugal monobloc · sisteme de pompe
Pompe centrifugale monobloc
Pompe centrifugale monobloc compacte, cu aspirație axială, pentru lichide curate sau ușor murdare, neabrazive, cu vâscozitate mică, fără solide și fibre.
Distribuie
Desan Engineering monoblock centrifugal pumps are designed for clean or very slightly dirty, non-abrasive, low-viscosity liquids that do not contain solid particles or fibers.
They are single-stage, end-suction closed impeller monoblock centrifugal pumps with volute casing — motor and pump form one compact drive unit.
Caracteristici
- Pump shaft supported by the motor bearings
- Shaft sealing by mechanical seal (standard)
- Casing dimensions comply with TS EN 733 / DIN 24255
- Suction and discharge flanges: TS EN 1092-2 / PN 16
- Electric motors compliant with VDI standards and IEC frame sizes
Materials and seal may change with liquid density, temperature and pressure. Casing and impeller can be produced in bronze or stainless steel when required.
| Parametru | Valoare |
|---|---|
| Suction flange | DN 50 – DN 150 |
| Flanșă de refulare | DN 32 – DN 150 |
| Debit (Q) | Up to 560 m³/h |
| Înălțime de pompare (H) | Up to 95 m |
| Turația motorului | Up to 1,450 – 2,900 rpm |
| Temperatură de lucru | de la -10 °C la +140 °C |
| Presiune carcasă (Pmax) | 10 – 16 bar |
| Casing standard | TS EN 733 / DIN 24255 |
| Standard flanșe | TS EN 1092-2 / PN 16 |
| Seal | Mechanical seal |
| Construcție | Monoblock centrifugal |
Full curves, BOM lists and dimension tables are in the technical catalog (PDF).
Desen dimensional — montaj și dimensiunile flanșelor.
Secțiune — construcția internă a pompei monobloc.
Domenii de funcționare
Curves cover 1,450 rpm and 2,900 rpm (2-pole) motor bands with multiple DN / impeller and IEC motor frame combinations.
Envelope: flow up to 560 m³/h, head up to 95 m.
Share Q–H duty, liquid and preferred speed for model and motor kW selection.
Trimiteți cerințele proiectului. Echipa răspunde cu pompa potrivită.
