Monoblok centrifugalni · crpni sustavi
Monoblok centrifugalne crpke
Kompaktne monoblok centrifugalne crpke s aksijalnim usisom za čiste ili malo onečišćene, neabrazivne tekućine niske viskoznosti, bez krutih čestica i vlakana.
Podijeli
Desan Engineering monoblock centrifugal pumps are designed for clean or very slightly dirty, non-abrasive, low-viscosity liquids that do not contain solid particles or fibers.
They are single-stage, end-suction closed impeller monoblock centrifugal pumps with volute casing — motor and pump form one compact drive unit.
Istaknuto
- Pump shaft supported by the motor bearings
- Shaft sealing by mechanical seal (standard)
- Casing dimensions comply with TS EN 733 / DIN 24255
- Suction and discharge flanges: TS EN 1092-2 / PN 16
- Electric motors compliant with VDI standards and IEC frame sizes
Materials and seal may change with liquid density, temperature and pressure. Casing and impeller can be produced in bronze or stainless steel when required.
| Parametar | Vrijednost |
|---|---|
| Suction flange | DN 50 – DN 150 |
| Tlačna prirubnica | DN 32 – DN 150 |
| Protok (Q) | Up to 560 m³/h |
| Visina dobave (H) | Up to 95 m |
| Brzina motora | Up to 1,450 – 2,900 rpm |
| Radna temperatura | od -10 °C do +140 °C |
| Tlak kućišta (Pmax) | 10 – 16 bar |
| Casing standard | TS EN 733 / DIN 24255 |
| Norma prirubnica | TS EN 1092-2 / PN 16 |
| Seal | Mechanical seal |
| Konstrukcija | Monoblock centrifugal |
Full curves, BOM lists and dimension tables are in the technical catalog (PDF).
Dimenzijski crtež — montaža i dimenzije prirubnica.
Presjek — unutarnja izvedba monoblok crpke.
Radna područja
Curves cover 1,450 rpm and 2,900 rpm (2-pole) motor bands with multiple DN / impeller and IEC motor frame combinations.
Envelope: flow up to 560 m³/h, head up to 95 m.
Share Q–H duty, liquid and preferred speed for model and motor kW selection.
Pošaljite zahtjeve projekta. Tim odgovara odabirom crpke.
