Ауа және сұйықтық шығарғыштар · Буды басқару жабдығы
Жоғары қысымды ауа шығарғыш
This ауа шығарғыш removes air and gases from heating, cooling and other liquid circuits. A float and lever open the vent when air arrives and close it when water lifts the float. Higher pressure class than the standard liquid-circuit unit.
Share
The air drainer is used to remove air and gases from the system, especially in heating and cooling lines and other fluid liquid systems. Aeration is performed by a float and lever. When air or other gases come in to the device, the клапан opens and starts evacuation. When water arrives, it lifts the float and closes the orifice. Sealing against water is ensured. This cycle continues automatically
- Installation: – The air drainer should be mounted at the highest point system.
- Do not use elbows on entry lines. Use one клапан in front of the entrance, so you can isolate the air drainer from the system for repair and cleaning.
- It can be installed horizontally but it should not be preferred except in very obligatory situations
- WORKING CONDITIONS Max. Working Pressure: PN 25
- Max. Working Temp.: 198°C
- Dia (inch): 3/4″x1/2″
| Parameter | Value |
|---|---|
| Type | Жоғары қысымды ауа шығарғыш |
| Серия | Ауа және сұйықтық шығарғыштар |
| Service | Steam, condensate and process systems |
| Connections | Threaded, фланецті or to project specification |
| Selection | Share fluid, pressure, temperature and duty for a matching selection |
Send your project requirements. Командамыз сәйкес таңдаумен жауап береді.