Тік көпсатылы гидрофор сорғылары

Hydrophore · Сорғы жүйелері

Тік көпсатылы гидрофор сорғылары

Vertical shaft, көпсатылы гидрофор (қысым арттырғыш) сорғы sets for pressurized water supply in buildings and industrial facilities. Available as 1, 2 or 3 сорғы configurations.

Share

Серия: Hydrophore | Санат: Сорғы жүйелері | Режим: каталог

Desan Engineering тік көпсатылы гидрофорs are designed for liquids that do not contain corrosive substances or large solid particles.

Vertical shaft, multi-stage, closed impeller сорғылар with Noryl Теңгерім тесіктері осьтік жүктемені азайту үшін динамикалық теңгеріледі. Арын фланеці төменде, қозғалтқыш жағында, ал сору фланеці төменгі корпуста орналасады. Бұл машина залына ықшам орналасу береді.

Package features

  • Стандартты орындау: қажетті шығынға қарай бір, екі немесе үш сорғы жиынтығы
  • Single-сорғы sets: phase protection / sequencing relay (FKS) and water level float switch
  • Mechanical seal standard; alternate seal brands/types and materials on request
  • Typical materials: suction casing GGG25, discharge casing GG25, shaft AISI 304, impeller Noryl
Parameter Value
Серия range 100 / 200 / 300 / 400 / 500 / 600 / 700
Configuration 1, 2 or 3 сорғы қысым арттырғыш sets
Impeller Noryl
Shaft AISI 304
Suction casing GGG25 шойын
Discharge casing GG25 шойын
Shaft sealing Mechanical seal (standard)
Controls (1-сорғы) FKS phase/sequencing + float switch
Layout Vertical көпсатылы, space-saving

Example material set (200-8 class): suction GGG25, discharge GG25, impeller Noryl, shaft AISI 304.

Cross-section drawing — тік көпсатылы construction.

Cross-section drawing — vertical multistage construction.

Dimensional drawing — set layout and connections.

Dimensional drawing — set layout and connections.

Full curves, BOM lists and dimension tables are in the technical catalog (PDF).

Booster packages
Sets combine сорғы type, motor kW (examples from ~5.5 to 18.5 kW at 2,900 rpm), membrane ыдыс volume (e.g. 500 / 750 / 1,000 L) and 1× / 2× / 3× сорғы arrangements.

Operating curves show staged contribution of 1st, 2nd and 3rd сорғылар across the Q–H envelope.

Share required flow, pressure, number of сорғылар and ыдыс preference for package selection.

Жоба талаптарын жіберіңіз. Командамыз сәйкес сорғы таңдауымен жауап береді.

    WhatsApp