Vertical In-Line · Pump Systems
Vertical In-Line Pumps
Vertical shaft, single-stage in-line centrifugal pumps for clean liquids — install directly in the pipeline to save floor space.
Share
Desan Engineering vertical in-line centrifugal pumps are suitable for liquids that do not contain corrosive substances or large solid particles.
They are single-stage, vertical shaft, volute casing, in-line connectable, closed impeller centrifugal pumps — installed directly in the pipeline to reduce floor space.
Highlights
- Shaft connection or rigid coupling between motor and pump shaft
- Suction and discharge flanges: TS EN 1092-2 / PN 16
- Mechanical seal in series production
- Easy disassembly: seal box, shaft and impeller can be removed without removing the volute from the system
- Casing / impeller materials may be bronze or stainless steel depending on duty
| Parameter | Value |
|---|---|
| Configuration | Vertical shaft, single-stage, in-line |
| Discharge flange | DN 32 – DN 150 |
| Flow rate (Q) | Up to 850 m³/h |
| Head (H) | Up to 100 m |
| Motor speed | Up to 3,600 rpm |
| Operating temperature | -10 °C to +140 °C |
| Casing pressure (Pmax) | 10 – 16 bar |
| Flange standard | TS EN 1092-2 / PN 16 |
| Seal | Mechanical seal (std); options by duty |
| Impeller | Closed impeller |
Full curves, BOM lists and dimension tables are in the technical catalog (PDF).
Dimensional drawing — in-line outline and motor mounting.
Cross-section drawing — vertical in-line construction.
Operating ranges
Performance published for 1,450 rpm and 2,900 rpm bands across in-line DN / impeller sizes.
Envelope: flow up to 850 m³/h, head up to 100 m.
Send required flow, head and installation constraints for model selection.
Send your project requirements. Our team will reply with the suitable pump selection.
